Product Advantages
The T4500 multifunctional leaf collection vehicle can effectively solve the pain points of concentrated leaf falling season, where there are many leaves, large volume, difficult to collect, and difficult to transport. The car is equipped with a 3 cubic meter garbage bin, a 1.2 cubic meter clean water tank, and a dust removal and filtration system, which has the characteristics of large storage capacity and no dust. Adopting a large suction fan, it can quickly collect scattered and stacked fallen leaves. The unique fan mechanism design can crush and compress fallen leaves, greatly reducing their volume and increasing their storage capacity, effectively solving the problem of difficult storage and transportation, and greatly improving work efficiency.
The vehicle chassis adopts a new energy second-class chassis, with a vehicle announcement and 3C certification, and can be licensed nationwide. Moreover, the operation buttons can be operated in the cab equipped with air conditioning, making the operation simple and convenient, safe, energy-saving, and environmentally friendly. In addition, the vehicle is also equipped with a high-pressure washing system, which can be used as a high-pressure cleaning vehicle or sweeping vehicle during non deciduous seasons, for high-pressure washing operations on curbstones, non motorized lanes, garbage bins, etc. One machine is versatile, effectively improving the overall vehicle utilization rate.
Working mode:
The T4500 multi-function leaf collection vehicle uses the bottom suction cup collection mode, which is suitable for the collection of leaves such as motor lanes, and the front brush system will expand the sweeping area, efficient and continuous leaf collection operation.
1. The top of the box is equipped with a multi-stage dust filter system, which can effectively filter the dust generated during the working process.
2. The front side brush system of the vehicle has the function of water dust removal, which can effectively inhibit the generation of dust in the cleaning process.
3. T4500 multi-functional leaf collection vehicle is equipped with an overhead mechanical arm collection system, which is suitable for operation in concentrated leaf areas such as leaf accumulation and shrub belt.
4. T4500 multi-functional leaf collection vehicle has high pressure washing function, which can effectively wash the multi-lane leaves in the fall season, and collect the leaves to the edge of the road, which is convenient for leaf collection without interfering with the traffic flow of the main lane. In the non-falling leaves season, the pavement can be washed and dust removed to complete the conventional pavement maintenance task.
5.T4500 multi-functional leaf collection vehicle has the functions of leaf collection and high pressure washing at the same time, but it is not recommended that customers use this operation mode for a long time, because the vehicle has a large power during operation and a large loss of on-board battery. In order to achieve the best working state, it is recommended that users use any of the first three working modes independently.
Application Area
 |
 |
| Item |
Parameter |
| Electric machine |
Type |
Permanent magnet synchronization |
| Rated/Peak power (Kw) |
55/110 |
| Rated/Peak torque (Nm) |
150/318 |
| Rated/Peak speed (rpm) |
3500/12000 |
| Cooling mode |
water-cooling |
| Electric control |
Motor controller type |
Integrated controller |
| Motor control manufacturers |
Chengdu One New energy vehicle Co., LTD |
| Integrated controller function |
MCU, DC/DC, PDU, and power access interface |
| Cooling mode |
water-cooling |
| Power battery |
Battery manufacturer |
Hefei Guoxuan high-tech power energy Co., LTD |
| Battery power (Kwh) |
57.6 |
| Battery voltage (V) |
384 |
| Cell type |
Lithium iron phosphate |
| Temperature control system |
Air cooling |
| Chassis system |
Frame size (mm) |
130x50 |
| Frame width (mm) |
750 |
| Front leaf spring |
3 |
| Rear spring |
5 |
| Shock absorber |
Two-way cylinder shock absorber |
| Front axle |
1.5t cast welded round tube front axle |
| Rear axle |
3t stamping and welding integral rear axle |
| Principal reduction ratio |
5.833 |
| Tyre specification |
185R15LT-8PR |
| Direction machine type |
Mechanical cycle ball type |
| Directional assist type |
Tubular Electric Power Steering (C-EPS) |
| Brake type |
Hydraulic braking |
| Service brake |
Front disc and rear drum brake |
| Parking brake |
Central drum brake |
| Function configuration |
Air conditioner |
Single cooling air conditioning +PTC warm air |
| Security configuration |
ABS |
| Item |
Parameter |
| Dimension (mm) |
5115x1750x2250 |
| Wheelbase (mm) |
2800 |
| Front/rear overhang (mm) |
1271/1044 |
| Front/rear wheelbase (mm) |
1403/1242 |
| Service weight (Kg) |
3690 |
| Max. total mass (Kg) |
4495 |
| Min. turning radius (mm) |
6500 |
| Min. ground clearance (mm) |
110 |
| Vehicle function |
Leaf collection/high pressure washing |
| Dustbin volume (m³) |
3 |
| Working mode of leaf collection |
Bottom suction cup/swivel arm handheld straw |
| Collection box outlet dust removal form |
Plate filter, cartridge filter group |
| Number of cartridge (only) |
4-5 |
| Filter cartridge working mode |
Chain drive rotation/pick dust |
| Effective filtration area (㎡) |
30 |
| Fan Motor Power (kw) |
10 |
| Discharge form |
Hydraulic self-discharge |
| Hydraulic unit Motor Power (kw) |
1.5 |
| Suction width (mm) |
850 |
| Suction hose diameter (mm) |
200 |
| Working form of mechanical arm |
Up/down/front right rotation suction |
| Mechanical arm pipette diameter (mm) |
200/180/160 |
| Mechanical arm control mode |
Manual micromotion control |
| Handheld straw Diameter (mm) |
160 |
| Handheld Straw Length (m) |
3-5 |
| Number of vehicle water tanks |
1 |
| Vehicle water tank Capacity (L) |
1200 |
| Vehicle water tank filling method |
Normal water injection/hydrant injection |
| High pressure pump motor power |
4KW |
| High pressure pump flow (L/min) |
15 |
| High Pressure Pump pressure (Mpa) |
20 |
| Waterway conversion form |
Linkage control |
| Number of sweep |
2 |
| Brush diameter (mm) |
800 |
| Effective cleaning width (mm) |
2200m |
| Cleaning area (㎡/h) |
30000 |
| Number of hedge head |
2 |
| Flush width (m) |
5-6 |
| Hand-held high-pressure flush tube length |
15 (m) |
| Monitoring system |
Front/rear/bottom 4 link control |
